Canon Camcorder XF205 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF205 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
Using the Focal Length Guide
128
Using the Focal Length Guide
The focal length guide aids you when using two camcorders for 3D recording. The guide appears as a numerical
value and has a range of 202 steps. You can set the guide to 0 at any point in the zoom range to help precisely
calibrate both camcorders.
1 Set up two camcorders and align their picture angle at full
telephoto.
2 Open the [Focal Length] submenu.
[~ Camera Setup] > [Zoom] > [Focal Length]
3 Select [Set To 0] and then press SET.
4 Press MENU.
• The focal length guide appears on the left of the screen as [ ±0].
To turn off the indicator, select [Off] instead.
5 Operate the zoom.
• If both camcorders are set so that the same value is displayed during zoom, the focal length for both
camcorders will remain almost the same.
NOTES
• Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while
recording.
• You can obtain more accurate results when you perform this procedure at full telephoto.
• The same picture angle for both camcorders cannot be guaranteed.
• When using the digital tele-converter or digital zoom
- When the focal length is reset to zero, the digital tele-converter or digital zoom is deactivated and
[~ Camera Setup] > [Zoom] > [Mode] is set to [Normal] (optical zoom only).
- If the focal length was reset to zero while the zoom was in the digital zoom range, the zoom position will
change automatically to the telephoto end of the optical zoom.
Operating modes:
[~ Camera Setup]
[Zoom]
[Focal Length]
[Off]
C OPY

   Find Your Products By Category