Canon Camcorder XF205 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF205 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
Using Metadata
112
NOTES
• After you set a user memo, do not remove the SD card while you are
recording. If the SD card is removed, the user memo will not be added
to MXF clips.
• You must set the user memo before you start recording for it to be added to
MXF clips. You cannot change the user memo already added to an MXF clip
using the camcorder but you can do so with
Canon XF Utility
.
Setting a User Memo Using Browser Remote
After completing the necessary preparations (A 182), you can create a user memo profile and transfer it to the
camcorder from a connected device using the Browser Remote application. Using the Browser Remote
application you have two additional advantages over user memos created with Canon XF Utility: you can
change the user memo of the last clip recorded, even if you did not specify a user memo in advance; and you
can enter manually the GPS information of your shooting location as long as the optional GP-E2 GPS receiver is
not connected to the camcorder.
1 Press the [Metadata Input] tab on the Browser Remote screen.
2 Press [ Activate].
• Alternatively, on the camcorder, you can set [w Other Functions] > [MXF] > [Set Metadata] > [Setting] to
[Remote].
3 Fill the necessary user memo and GPS information fields.
• You can press [Clear] to clear the information entered into each field.
4 Press one of the transfer options to transfer the metadata to the camcorder.
• [Metadata correctly transferred] will be displayed on the Browser Remote screen and the metadata will be
transferred and applied to the clips on the camcorder.
5Press ^ to close the message.
Options
[Apply from Next]: Adds the metadata you set in Browser Remote to all MXF clips recorded after the transfer.
[Overwrite Prev.]: Only available after recording an MXF clip. Adds the metadata you set in Browser Remote to all MXF
clips recorded after the transfer and also to the last MXF clip recorded (overwriting any user memo that
may have been recorded previously with the clip).
[Overwrite]: Only available while recording an MXF clip. Adds the metadata you set in Browser Remote to the MXF
clip that is being recorded (overwriting any previous user memo). It will also add this metadata to all MXF
clips recorded after the transfer.
[w Other Functions]
[MXF]
[Set Metadata]
[User Memo]
C OPY

   Find Your Products By Category