Canon Camcorder Canon Vixia Hf G20 Camcorder User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder Canon Vixia Hf G20 Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 184
 
Recording Movies and Photos
43
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the camcorder without switching to
playback mode. While reviewing the latest scene, the picture will be played back without sound.
1 Set the mode switch to n or E.
2 Review the last 4 seconds of the scene.
[FUNC.] > [
v Review Recording]
NOTES
• When double slot recording is activated, only the scene recorded on memory card 2 will be played
back.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so
may result in permanent data loss or damage to the memory.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• Be sure to save your recordings regularly (A 124), especially after making important recordings.
Canon shall not be liable for any loss or corruption of data.
• If supported recordings were made on an Eye-Fi card in memory card slot 3, wireless upload will
start automatically after setting the camcorder to playback mode, if you are within the range of a
configured network. Always verify that Eye-Fi cards have been approved in the country/region of
use. See also Using an Eye-Fi Card (A 136).
NOTES
• About the power saving mode: If q > [Power Saving Mode] > [Auto Power Off] is set to
[i On], the camcorder will shut off automatically to save power when it is powered by a battery
pack and is left without any operation for 5 minutes. Press P to turn on the camcorder.
• When recording in bright places, it may be difficult to use the LCD screen. In such cases, you can
turn on the LCD backlight (A 24) or adjust the brightness of the LCD screen with the q >
[LCD Brightness] setting. Alternatively, you can also use the viewfinder (A 22).
• When you need to record for a long time with the camcorder set on a tripod (a school recital, for
example), you can close the LCD panel and use only the viewfinder in order to save power when
using a battery pack (A 22).
Operating modes:
COPY

   Find Your Products By Category