Canon Camcorder Canon Vixia Hf G20 Camcorder User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder Canon Vixia Hf G20 Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 184
 
Copying Recordings to a Memory Card
126
Copying Photos from the Index Screen
1 Open the [Photos] index screen (A 91).
• Check that you have selected the & tab (built-in memory) or 6 tab (memory card 2).
2 Open the screen to copy photos.
[Edit] > [Copy (&'7)] or [Copy (6'7)]
3 Touch the desired option and then touch [Yes].
• When you select [Select], perform the following procedure to select the individual photos you
want to copy before touching [Yes].
• Touch [Stop] to interrupt the operation while it is in progress.
• The selected photos are copied.
4Touch [OK].
To select individual photos
1 Touch on the individual photos you want to copy.
• A checkmark ! will appear on the photos you touch. The total number of selected photos will
appear next to the " icon.
• Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch
[Remove All] > [Yes].
2 After selecting all the desired photos, touch [OK].
Options
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• If supported recordings are copied onto an Eye-Fi card in memory card slot 3, wireless upload will
start automatically if you are within the range of a configured network. Always verify that Eye-Fi
cards have been approved in the country/region of use. See also Using an Eye-Fi card (A 136).
NOTES
• In the following cases, you will not be able to copy recordings to the memory card:
- If the double memory card slot is open.
- If the LOCK switch on memory card 3 is set to prevent writing.
- If there is no memory card in memory card slot 3.
• Scenes that were edited using the supplied software VideoBrowser and were then transferred
back to the camcorder cannot be copied to the memory card.
• If there is not enough space on memory card 3, as many photos as possible will be copied before
stopping the operation.
Operating modes:
[Select] Select individual photos to copy.
[All Photos] Copy all the photos.
COPY

   Find Your Products By Category