0

Out of 0 Ratings

Owner's of the Sharp Car Video System PN-L803C LCD MONITOR gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 69
 
59
E
[Advanced operation]
Command-based control
You can control the monitor using RS-232C commands
(see page 43) via terminal software and other appropriate
applications.
In order to use this function, enable a connection to the
monitor through Internet Explorer.
Read the manual for the terminal software for detailed
instructions.
(1) Connect the PC to the monitor.
1. Specify the IP address and data port number and
connect the PC to the monitor.
When connection has been established successfully,
[
Login:] is returned as response.
2. Send the user name set in the SECURITY settings (see
page 55).
Send [User name] + [
].
If the user name is not set, send [
].
When the transmission is successful, [
Password:]
is returned as response.
3. Send the password set in the SECURITY settings (see
page 55).
Send [Password] + [
].
If the password is not set, send [
].
When the transmission is successful, [OK
] is
returned as response.
(2) Send commands to control the monitor.
The commands used are the same as those for RS-
232C. Refer to the communication procedure (see
page 40) for operation.
Usable commands are provided in the RS-232C
command table (see page 43).
(3) Disconnect the connection with the monitor and
quit the function.
1. Send [BYE ].
When the transmission is successful, [goodbye] is
returned and the connection is disconnected.
TIPS
Connection is automatically disconnected when the
time specied in AUTO LOGOUT TIME elapses over a
no-communication period.
Controlling the Monitor with a PC (LAN)