0

Out of 0 Ratings

Owner's of the Canon Camcorder Canon XA10 Professional Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 191
 
Uploading Movies to Video Sharing Web Sites
139
Uploading Movies to Video Sharing Web Sites
With the supplied software Transfer Utility, you can upload your scenes to your favorite video sharing
Web site. To do so, you must first convert them into standard-definition scenes in the camcorder.
If you are using an Eye-Fi card, you can upload the standard-definition scenes wirelessly, directly from
the camcorder. Refer to Eye-Fi’s homepage for the latest information on compatible Web sites.
Installation
Install the software before you connect the camcorder to the computer for the first time. Refer to the
Installation Guide (supplied leaflet) and follow the instructions in the Software Guide (PDF file) to install
the supplied PIXELA’s software.
Converting Scenes into Standard Definition from the Date Index Screen
1 Power the camcorder using the compact power adapter.
2 Make sure there is a memory card in memory card slot Y with sufficient available space.
3 Open the date index screen.
Check that you have selected the f tab (built-in memory) or 4 tab (memory card X).
To convert all the scenes recorded on a specific date, drag your finger left/right until the desired
date appears in the title bar.
4 Press Z to convert all the scenes recorded in the selected date. Alternatively, touch
[Edit] [Convert HD9SD (f97)] or [Convert HD9SD (497)] and select one of the
options for converting multiple scenes.
You can convert all the scenes recorded on the date shown
in the control button, select individual scenes to convert or
convert all the scenes.
When you select [Select], perform the procedure described
below to select the individual scenes you want to convert.
If a copyright notice appears, read it carefully and touch
[OK] if you agree.
5 Review the conversion settings and touch [Next].
Before touching [Next], you can touch [5] to change the
conversion settings as described below.
6 Touch [START] to convert the scenes.
Before touching [START], you can touch [ ] to add graphical elements to the converted SD
movies (0 110), or touch [ ] to adjust the volume (0 94) and background music balance
(0 119).
You can also decorate the scenes as they are being converted.
Touch [STOP] to interrupt the operation while it is in progress.
7 When the conversion is completed, a confirmation screen will appear.
Connect the camcorder to the computer at this point (0 141) to continue uploading the
converted videos to the Web or touch [End Without Connecting] to connect to the computer
later.
Operating modes:
COPY