0

Out of 0 Ratings

Owner's of the Canon Camcorder XF305 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
Recording
102
3
Special Recording Modes
Available Intervals*
* In the camcorder’s menu, seconds are indicated by [sec] and minutes are
indicated by [min].
Activating Interval Recording Mode and Recording
1 Open the [Special Rec] submenu.
[J Other Functions] [Special Rec]
2 Select [Interval Rec] and then press SET.
[INT STBY] appears at the top of the screen (with [INT] flashing).
3 Press the START/STOP button to begin recording.
The camcorder automatically records the set number of frames at
the set interval.
The tally lamps illuminate.
[INT STBY] changes to [N INT REC] while recording frames and
[N INT STBY] while between intervals.
4 Press the START/STOP button again to stop recording.
All of the recorded frames are joined together into one clip.
The tally lamps go out and [INT STBY] appears at the top of the
screen (with [INT] flashing).
NOTES
You can use only one special recording mode at a time.
While recording, you cannot change the interval or number of frames.
Some frames at the point the recording was stopped may be recorded
and added to the end of the clip.
Interval recording mode will be deactivated if the special recording
mode is changed or turned off. It will be deactivated also if you change
the [J Other Functions] [Bit Rate/Resolution] or [Frame Rate]
setting.
The time code advances by the number of frames recorded. If the
running mode of the time code (0 81) is set to [Free Run] or the time
code is input from an external source (b only), the running mode
will switch to [Rec Run] during special recording mode. When special
recording mode is deactivated, the running mode will return to its
previous setting.
b During special recording mode, the time code signal will not
be output from the TIME CODE terminal or HD/SD SDI terminal.
1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 7 sec 8 sec 9 sec
10 sec 15 sec 20 sec 30 sec 40 sec 50 sec 1 min 2 min 3 min
4 min 5 min 6 min 7 min 8 min 9 min 10 min
[J Other Functions]
[Special Rec]
[Off]