0

Out of 0 Ratings

Owner's of the Canon Camcorder XF305 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
Recording
74
3
Zooming
Zooming
You can operate the zoom (up to 18x) using the zoom rocker on the side
grip or the one on the handle. You can also use the zoom ring on the lens
or the zoom buttons on the wireless controller.
Selecting the Zoom Controls
Set the ZOOM switch to the desired option.
Options
NOTES
When you turn on the camcorder in mode or set the POWER
switch from MEDIA to CAMERA, the initial zoom position will depend
on the ZOOM switch setting. When the ZOOM switch is set to RING,
the zoom position will be at the current position of the zoom ring; when
the zoom switch is set to ROCKER, the zoom position will be at the
same position is was the last time the camcorder was in mode.
You can set the [l Camera Setup] [Tele-converter] setting to [On]
to increase the focal length by a factor of approximately 1.5*.
Alternatively, you can set an assignable button to [Tele-converter]
(0 107) to activate the digital tele-converter.
*The image is digitally processed, so the image resolution may deteriorate.
Using the Zoom Ring
Zoom in and out on a subject by turning the zoom ring after you set the
ZOOM switch to RING. The zoom speed depends on how fast you turn
the zoom ring.
NOTES
If you turn the zoom ring too quickly, the camcorder may not be able to
zoom immediately. In such case, the camcorder will zoom after you
finish turning the zoom ring.
When you set the ZOOM switch to RING, the zoom position will move
to the current position of the zoom ring, which will change the picture
angle. Also, the picture may become out of focus.
Operating modes:
RING: Allows you to use the zoom ring.
ROCKER: Allows you to use the zoom rocker on the side grip or handle,
the buttons on the supplied wireless controller, or buttons on an
optional remote control connected to the REMOTE terminal.