Kramer Electronics TV Cables Kramer Electronics TV Cables User Manual

0

Out of 0 Ratings

Owner's of the Kramer Electronics TV Cables Kramer Electronics TV Cables gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 56
 
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-4x8AK
20
7 Operating the VP-4x8AK
This section describes how to:
• Use the IN and OUT buttons (see
Section 7.1)
• Read the 7-segment displays (see
Section 7.2)
• Confirm settings (see
Section 7.3)
• Store and recall input/output configurations (see
Section 7.4)
• Lock the front panel (see
Section 7.5)
• Choose the audio-follow-video or the breakaway feature (see
Section 7.6)
• Use the audio gain control (see
Section 7.7)
7.1 Switching an Input to an Output
To switch an input to an output:
1. Press the required OUT button.
The input under the selected output on the IN 7-segment display blinks.
2. Press an IN button to select the input to switch to the output.
The selected input number appears on the 7-segment display.
Incomplete operations on the VP-4x8AK timeout after 15 seconds
7.2 Understanding the 7-Segment Displays
The VP-4x8AK has two displays:
• The STATUS 7-segment display
• The REL. AUDIO LEVEL (dB) 7-segment display
7.2.1 The STATUS 7-Segment Display
During normal operation, the STATUS display shows which inputs are
switched to which outputs, as illustrated in
Figure 11. In the VIDEO mode,
the display shows the video signal setup and in the AUDIO mode, it shows
the audio signal setup. In the AFV it shows both signals (see Section
7.6).
input 4 is connected
to output 8
input 3 is connected
to output 3
Figure 11: 7-segment display During Normal Operation

   Find Your Products By Category