Datavideo DVD Recorder Datavideo HD HDD Recorder User Manual

0

Out of 0 Ratings

Owner's of the Datavideo DVD Recorder Datavideo HD HDD Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 35
 
8
HDR-40 Rear Panel
The GPI socket. Can be used for simple external control. The HDR-40 can
accept pulse or level trigger inputs, which can trigger record or playback and
pause commands See GPI Mode & Function Menus Page 17
RS-422 / RS-232 Port. The HDR-40 can be controlled via RS-422 from external
devices, or via RS- 232 from PC. The HDR-40 uses standard SONY protocol.
For more RS-422 / RS-232 information see Page 25
XLR Balanced Audio input
For CH1/L and CH2/R audio input.
HDMI Out Po
r
t.
Port for connecting to external HDMI monitors and devices.
HD/SD-SDI input and Loop-through output connectors.
DC In Socket. Connect the supplied 12V 3A PSU to this socket. The
connection can be secured by screwing the outer fastening ring of the DC In
plug to the socket.
Power On/Off Switch. Switches the power On / Off.
Grounding Terminal. When connecting this unit to any other component, make
sure that it is properly grounded by connecting this terminal to an appropriate
point. When connecting, use the socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm2.

   Find Your Products By Category