Datavideo DVD Recorder Datavideo HD HDD Recorder User Manual

0

Out of 0 Ratings

Owner's of the Datavideo DVD Recorder Datavideo HD HDD Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 35
 
15
Then press the Menu Button to leave menu mode
Below is a table showing the maximum amount of HD record time with a 120 GB Hard Drive fitted to the unit.
The table below is for guidance only when the drive is empty or has just been formatted. All times are
approximate maximum values which leave a safety margin for drive read/write times and file overheads.
Datavideo do not recommend trying to record to a drive which is over 75% full or trying to record for over
9hrs to one track.
HDD Type Bit Rate Mode Maximum Recordable Time
120GB 20 Mbps 675 mins or 11hrs 15mins
120GB 40 Mbps 330 mins or 5hrs 30mins
120GB 60 Mbps 225 mins or 3hrs 45mins
SD MPEG2 BIT RATE Menu
The HDR unit has user selectable encoding bit rates of 5, 10 and 15 Mbps for recording SD tracks or M2T
files.
To select the SD MPEG2 BIT RATE:
Press the Menu Button, to enter the menu mode.
Press the FWD (►►) Button to navigate the menus until SET MPEG2 BIT RATE is displayed.
Press the Next (▲) Button (right) to enter the SET MPEG2 BIT RATE menu.
Use the FWD(►►) or REW(◄◄) Button to select the desired bit rate (5, 10 or 15 Mbps)
To confirm your selection and exit the menu press the Next (▲) Button (right).
Then press the Menu Button to leave menu mode.

   Find Your Products By Category