CHIEF Projection Television CHIEF Projection Television User Manual

0

Out of 0 Ratings

Owner's of the CHIEF Projection Television CHIEF Projection Television gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
Installation Instructions LPK1
7
Threaded Rod Installation
The LPK1
may be suspended from four 3/8" diameter ASTM
A307 or stronger threaded rods (not included) which are
secured to a 1-5/8" x 1-5/8" 12ga metal framing strut channel
(spanning a maximum of 4 feet--not included) by ASTM A307 or
stronger 3/8" channel nuts (not included).
WARNING: IMPROPER INSTALLATION CAN RESULT IN
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT! Structural members MUST be capable of
supporting five times the combined weight of all equipment
being mounted.
1. Carefully determine required mount position.
IMPORTANT ! : This will require knowing the lens to
screen distance. See projector specifications for
determining this distance.
2. Secure one end of the threaded rod to the structural
member.
3. Install four 3/8" jam nuts and washers on each threaded rod.
4. Install the LPK1 with VCM (not included) onto the threaded
rod. (See Figure 7)
5. Secure the LPK1 to the threaded rod using four 3/8"
washers and jam nuts. (See Figure 7)
Figure 7
INSTALLING PROJECTOR
Install projector with attached interface bracket to VCM (not
included) following instructions included with the VCM.
4
x 8
5
x 8

   Find Your Products By Category