0

Out of 0 Ratings

Owner's of the DJI Video Games DJI Phantom 2 Vision Drone gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 50
 
Assistant Software
©
2014 DJI. All Rights Reserved.
45
DMG installer supports Mac OS X 10.6 or above.
Phantom 2 Vision+ Assistant on Mac OS X and Windows are the same. Assistant pages shown in this manual
are from the Windows version.
2 Using Assistant
The Phantom 2 Vision+ Assistant is used to congure the ight control system and upgrade rmware. The Phantom RC
Assistant is used to congure the Remote Control and upgrade its rmware.
2.1 Using the Phantom 2 Vision+ Assistant
Figure 110
(1) Power on the PC and the Phantom 2 Vision+. Connect the Phantom 2 Vision+ to the PC with a Micro-USB cable. DO
NOT disconnect until conguration is nished.
(2) Run Phantom 2 Vision+ Assistant and wait for the Phantom 2 Vision+ to connect. Watch the indicators
on the
bottom of the screen. When connected successfully, the Computer Connection status is
and Data Exchange
Indicator is blinks
.
(3) Choose [Basic] or [Advanced] conguration pages.
(4) View and check the current conguration in the [View] page.
View congurations
RC, Gain
Gimbal, Battery, Flight Limits
Data Exchange Indicator
Computer Connection status
Function switch between Phantom
and Naza-M working modo
Language swap
Account, software version
Firmware upgrade
IMU calibration
*This image is for reference
only. Please refer to the
actual user interface.
Figure 111
Do not enable Naza-M mode before finishing “Advanced Flight Maneuvers” in the "Phantom Pilot Training
Guide”.
Enable Phantom mode by tapping the same button if Naza-M mode is enabled. Once changed to Phantom
working mode, all parameters will return to factory settings.
2.2 Firmware Upgrade of the Phantom 2 Vision+
(1) Click [Upgrade] icon to check the current rmware version and whether the installed rmware is the latest version. If
not, click links to upgrade.
(2) Wait until the Assistant shows “nished”. Click OK and power cycle the Phantom 2 Vision+ after 5 seconds. Once
complete, rmware is up to date.
Using Assistant