Sharp Car Video System LCD Monitor User Manual

0

Out of 0 Ratings

Owner's of the Sharp Car Video System LCD Monitor gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 54
 
26
E
n
Dual screen display
You can display two screens simultaneously.
Set this function with PIP MODES of PIP/PbyP in the MULTI/
PIP menu.
PIP
Main screen
Sub
screen
A sub screen is displayed
inside a main screen.
PbyP
Main
screen
Sub
screen
A main screen and a sub
screen are displayed in a
line.
PbyP2
Main screen
Sub
screen
Displays a main screen
which measures 1440
pixels in the longest
direction and a sub
screen in a line.
* The currently selected input signal is displayed on the main
screen.
* The following combinations [A] and [B] are available for
display:
[A]: DVI-D/DisplayPort/HDMI
[B]: D-SUB/COMPONENT/VIDEO
TIPS
• You might infringe on a copyright of the author which is
protected by copyright law when you display the images of
the computer screen and television/VCR simultaneously for
prot-making or to show the image to the public.
• When the screen size is Dot by Dot or CUSTOM, dual-
screen display is not possible.
• When dual-screen display is selected, the screen size
cannot be set to Dot by Dot or CUSTOM.
• When PIP is selected, the sub screen is displayed at an
aspect ratio of 4:3, regardless of the screen size setting.
• When PbyP is selected, the main screen and sub screen
are displayed at the aspect ratio of the input signal,
regardless of the screen size setting.
• When PbyP2 is selected, the main screen and sub screen
are displayed at an aspect ratio of 4:3, regardless of the
screen size setting.
• When dual-screen display is selected, the SCREEN
MOTION function is disabled.
• When dual-screen display is selected, the screen cannot
be enlarged.
• When an interlaced signal (1080i, 480i, video) is input to
the sub screen, horizontal lines may icker. If this happens,
display the image on the main screen.
• When the main screen is DVI-D, HDMI, or DisplayPort,
the input mode that can be selected is DVI-D, HDMI, or
DisplayPort.
• When the main screen is D-SUB, COMPONENT, or
VIDEO, the input mode that can be selected is D-SUB,
COMPONENT, or VIDEO.
• In the following cases, dual-screen display is turned off:
- The power is turned off
- Input signal waiting mode is entered
Menu Items
n
Enlarge
• You can align several monitors and integrate them into a
single large screen to display.
• Up to 5 monitors can be aligned in both the horizontal and
vertical directions.
• Each monitor displays enlarged views of separated images.
(Example)
Horizontal direction: 2 monitors
Vertical direction: 2 monitors
Horizontal direction: 3 monitors
Vertical direction: 2 monitors
Setting procedure
Set using MULTI in the MULTI/PIP menu.
1. Set ENLARGE to ON.
2. Select ADVANCED (ENLARGE).
3. Set the number of monitors aligned in the horizontal
direction in ENLARGE H.
4. Set the number of monitors aligned in the vertical
direction in ENLARGE V.
5. Set the section of the separated image to be displayed
on each monitor in ENLARGE-POS.
1) Press
ENTER
.
2) Press
, , or to select position, then
press
MENU
.
TIPS
• When Enlarge is used, the SCREEN MOTION function is
disabled.
• When Enlarge is used, dual-screen display cannot be used.
• When Enlarge is used, the SELF ADJUST function is
disabled.

   Find Your Products By Category