0
Owner's of the Sennheiser Scale Infrared Bodypack Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:
Putting the EKI 830 into operation
EKI 830 | 7
Setting the receiver to the frequency of the transmission system
The receiver allows you to select between three channels with preset
frequencies so that you can match the receiver to the channel used by
your transmission system.
Overview of the channel indicator:
To change the channel:
Channel
Channel
indicator
Frequency You hear the sound in
1 2.3 MHz mono
2 2.8 MHz mono
3 2.3 MHz + 2.8 MHz stereo
̈ Press the on/off button. The receiver
switches on, the LEDs light up.
If the correct channel is already set,
no further steps are necessary.
To select a different channel:
̈ Press the channel selection button
repeatedly until the channel indi-
cator displays the desired channel
(see table).
If no further buttons are pressed,
the channel indicator goes off after
30 seconds. If no channel is found,
the channel indicator flashes.
If you wish your Sennheiser partner can permanently assign the
receivers to either channel 1 or 2 and disable the channel selec-
tion button to prevent user tampering.
Channel
4s
ON/OFF
1s
EKI830.book Seite 7 Donnerstag, 10. Mai 2012 2:02 14
Find Your Products By Category
Please Login
