Rolls Mixer MINIMIX A/V User Manual

0

Out of 0 Ratings

Owner's of the Rolls Mixer MINIMIX A/V gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 2
 
INTRODUCTION
Thank you for your purchase of the MX56c MiniMix A/V. The unit is ideal for A/V
presentations where a microphone must be mixed with a variety of sources such
as a CD player, MP3 player, laptop computer, etc.
INSPECTION
1. Unpack and Inspect the MX56c package
Your MX56c was carefully packed at the factory in a protective carton. Nonethe-
less, be sure to examine the unit and the carton for any signs of damage that
may have occurred during shipping. If obvious physical damage is noticed,
contact the carrier immediately to make a damage claim. We suggest saving
the shipping carton and packing materials for safely transporting the unit in the
future.
2. Please visit our website at
www.rolls.com
, and follow the Register Your War-
ranty Here link, or complete the Warranty Registration Card and return it to the
factory.
SPECIFICATIONS
Connectors: Input: 1/4" unbal.
1/8" (3.5 mm) stereo
XLR bal.
Stereo RCA
Output: Stereo RCA Line Level
1/8" TRS Stereo Phone
1/4" TRS Instrument or Mic Level, bal.
Max Gain: Ch 1; 15 dB
Ch 2; 60 dB
Ch 3; 15 dB
Ch 4; 40 dB
Channel Crosstalk: -70 dB
Phantom Power: 9 - 16 VDC depending on power source
Max Output: + 12 dB
S/N Ratio: >80 dB
THD: <.05%
Box Size: 6.5" x 2.7" x 1.55"
Weight: 2 lbs.
DESCRIPTION
FRONT PANEL
pwr SWITCH:
pwr SWITCH:
When pressed IN, applies power to the MX56c
pwr LED:
pwr LED:
Located just below the Power Switch, this LED Indicates the MX56c is
connected to a power source (battery or AC adapter), and the unit is on.
PHONE OUT
:
1/8" (3.5mm) TRS stereo jack for connection to stereo headphones
or earphones. NOTE: DO NOT CONNECT A MONO PLUG TO THIS JACK. DO-
ING SO WILL DAMAGE THE MX56c.
MONO
INST / MIC OUT
INST / MIC OUT
:
1/4" TRS balanced mic level output jack for connection
to another mixer's microphone input, or to an instrument amplifier.
LEVEL 1 - LEVEL 4:
Adjusts the signal level of the corresponding input channel.
REAR PANEL
BATTERY 9V:
Compartment for housing the 9V alkaline battery.
DC POWER INPUT:
Connects to the Rolls PS27; 12 - 16 VDC 150 mA power
supply. The inside of the jack (the post) is negative, the outside is positive.
S
TEREO OUT
: Stereo RCA jacks with the main mixed signal at line level.
STEREO LINE (Ch 1)
STEREO LINE (Ch 1)
: Stereo RCA jacks for connection to a line-level source
such as a CD, cassette or video player.
PHANTOM POWER:
The square hole between Line In 1 and Mic In 2 has the
phantom power jumper. To engage the phantom power, carefully pull out the
jumper with a pair of needle-nose pliers and replace it in a horizontal position so
the jumper shorts the two pins together.
MICROPHONE (Ch 2):
MICROPHONE (Ch 2):
XLR input jack for connection to a dynamic or condenser
microphone. If you are using a condenser type microphone make sure the Phan-
tom Power jumper is shorted together as described above.
STEREO LINE (Ch 3):
STEREO LINE (Ch 3):
1/8" (3.5mm" Tip-Ring-Sleeve stereo jack for connection to
a line-level stereo signal source such as a laptop computer.
MONO LINE (Ch 4):
MONO LINE (Ch 4):
1/4" Tip-Sleeve mono jack for connection to a mono line-lev-
el source such as the output of an instrument, or wireless microphone receiver.
LIMITED WARRANTY
For war
ranty information and registration, see our website at
www.rolls.com
.

   Find Your Products By Category