0
Owner's of the Plantronics Corded Headset 6096135 gave it a score of 0 out of 5. Here's how the scores stacked up:
The PLANTRONICS TECHNICAL ASSISTANCE CENTER (TAC) is
ready to assist you! Dial 800 544 4660 ext. 5538 or visit the
support section of our website at www.plantronics.com.
For accessibility information, also call the Technical
Assistance Center.
WARRANTY AND SERVICE
LIMITED WARRANTY
•
This warranty covers defects in materials and workmanship
of this Plantronics Product manufactured, sold, or certified
by Plantronics which was purchased and used in the United
States and Canada.
•
This warranty lasts for one year from the date of purchase
of the Product.
•
This warranty extends to you only if you are the end user
with the original purchase receipt.
•
We will, at our option, repair or replace the Product that
does not conform to the warranty. We may use functionally
equivalent reconditioned/refurbished/remanufactured/pre-
owned or new Products or parts.
•
To obtain service in the US, contact Plantronics at
800 544 4660 ext. 5538 and in Canada call 800 540 8363. If
you need additional information, please contact our service
centers at the numbers provided.
•
THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR
THE PRODUCT.
•
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state or
province to province. Please contact your dealer or our
service center for the full details of our limited warranty,
including items not covered by this limited warranty.
IMPORTANT SAFETY INFORMATION
•
Read all instructions before using.
•
The intended purpose of this HL10 Handset Lifter Accessory
is to lift and lower the telephone handset in conjunction with
Plantronics amplifiers manufactured for use with the HL10.
It should not be used for any other purpose.
•
Modification of the product will void the warranty.
•
Do not allow anything other than the telephone handset to
rest on this product or locate it in an area where normal
operation can be hampered. Additional weight will prevent
the lifter from working.
WARNINGS
•
When using telephone equipment and accessories, basic
safety precautions should be taken to reduce risk of fire,
electric shock, and injury to persons.
•
Keep fingers and other objects clear of the lifting pad.
•
To reduce risk of electric shock, do not disassemble this
product. Contact the Plantronics Technical Assistance
Center when service or repair work is required.
•
Unplug the lifter from the amplifier or the amplifier from
the power source (wall outlet) before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
MAKING AND RECEIVING CALLS
If your headset does not beep when the phone rings,
you may need to adjust the ringer on your phone.
1. For best results, choose a traditional ring pattern on
your phone.
2. Set the telephone ring volume at mid range.
3. If necessary, try different settings of ring pattern and
volume until the headset beeps when the phone rings.
If your headset still does not ring, attach the Ringer
Microphone Extension to your HL10 and place the Ringer
Microphone over the ringer speaker of your phone.
USING THE RINGER MICROPHONE EXTENSION
(IF REQUIRED)
If the HL10 microphone is not located above the ringer
speaker on your phone, you must install the optional
Ringer Microphone Extension.
1. Remove the cover from the Ringer Microphone Jack on
the HL10.
2. Connect the Ringer Microphone plug to the Ringer
Microphone Jack.
3. Place the Ringer
Microphone over the
ringer speaker on the
telephone. You should hear
a beep in the headset when
you receive a call.
4. Remove the protective cover
from the mounting tape and attach the Ringer
Microphone to the telephone ringer speaker.
While wearing your headset, press
the talk button to activate the HL10.
When you hear a dial tone, use the
telephone key pad to dial the number.
To end the call, press the talk
button again. The HL10 will return
the handset to the cradle and
disconnect the call.
SAFETY I WARRANTY I SERVICE I TECHNICAL ASSISTANCE
MOUNTING THE HL10 continued
2. Gently, place the HL10 into the
position you have identified.
Test that the lifter works.
3. Once you have located the
appropriate position, firmly
press down on the top of the
HL10 to attach the lifter to
the telephone base.
4. Place the handset on the HL10.
NOTE: Use a rolling motion to
attach the lifter.
Find Your Products By Category
Please Login
