Olympus Recording Equipment LS-100 User Manual

0

Out of 0 Ratings

Owner's of the Olympus Recording Equipment LS-100 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 135
 
119
EN
7
Using the recorder on your PC
Disconnecting from your PC
Windows
Macintosh
1
Click [ ] on the task bar located
at the lower-right corner of the
screen. Click [Safely remove USB
Mass Storage Device]
•
The drive letter will differ depending
on the PC being used.
1
Drag and drop the drive icon for
this recorder displayed on the
desktop to the Recycle Bin icon
2
Make sure that the recorder [PEAK]
indicator light (R) is off before
disconnecting the USB cable
•
The [PEAK] indicator light (R) will
light up orange while the recorder
is charging. The USB cable may
be removed during the charging
operation.
Using the recorder on your PC
2
Be sure that the recorder [PEAK]
indicator light (R) is off before
disconnecting the USB cable
•
The [PEAK] indicator light (R) will
light up orange while the recorder
is charging. The USB cable may
be removed during the charging
operation.
Note
•
NEVER disconnect the USB while the [PEAK] indicator light (R) is flashing. If you do, the data may be
destroyed.
•
When the recorder is connected to a PC, the power will be supplied from the USB cable supplied with the
recorder. No power supply is required from the batteries or the AC adapter to this recorder.
•
For more information on the USB port on your PC, refer to the user's manual for your PC.
•
Be sure to connect the USB cable directly to the USB port on your PC.
•
Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.
•
Release the recorder from HOLD.

   Find Your Products By Category