InFocus Projector IN2124a User Manual

0

Out of 0 Ratings

Owner's of the InFocus Projector IN2124a gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 60
 
12
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the projector off
after no active sources are detected and no user interaction with the projector is performed
for 30 minutes. By default, this feature is off. You can change the length of time, see page 30.
Turning off the projector
To turn the projector off, press the Power button on the remote or keypad. The lamp turns
off and the Power LED blinks blue for 30 seconds while the fans continue to run to cool the
lamp. If the Power Saving Mode feature is on and when the lamp has cooled, the LED lights
blue and the fans stop. If the Power Saving Mode feature is off and when the lamp has cooled,
the LED blinks blue and the fans stop. Unplug the power cable to completely power off the
projector.
Troubleshooting your setup
If your image appears correctly on the screen, skip to the next section. If it does not,
troubleshoot the setup.
The Status Indicator Lights on top of the projector
indicates th
e state of the projector and
can help you troubleshoot.
Table 3: Indicator Lights
Status Indicator Light Meaning
POWER: Solid Blue
TEMP: Off
LAMP: Off
POWER: Blinking Blue
TEMP: Off
LAMP: Off
1. If the Power Saving Mode feature is on,
the p
rojector is plugged in.
2. The projector is on and initialized.
3. The projector is in normal operation.
1. If the Power Saving Mode is off, the
pro
ject
or is plugged in.
2. The projector is powering down and
the fans are
cooling the p
rojector.
POWER: Blinking blue
TEMP: Blinking red
LAMP: Blinking red
POWER: Solid blue
TEMP: Blinking red
LAMP: Blinking red
The projector fan(s) are not operating
corr
ectly and the pro
jector has been shut
down.
The lamp failed to ignite.
Contact Technical Support if the problem
persi
sts
. Visit www.infocus.com/support
to contact service.
POWER: Solid blue
TEMP: Blinking red
LAMP: Blinking red
The lamp has reached its end of life and
mus
t be replaced. T
he lamp will continue
to operate until it fails.
Contact Technical Support. Repair may be
n
eeded.
POWER:
Solid blue
TEMP: Blinking red
LAMP: Off
1. The projector is overheating and the
lamp wil
l be s
hut off. The fans will
continue to run.
2. The projector will not turn back on
un
til th
e cooling process is complete.

   Find Your Products By Category