0

Out of 0 Ratings

Owner's of the Canon Exercise Fitness Videos XF105 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 186
 
Special Recording Modes
90
4 Open the [Special Rec] submenu.
[J Other Functions] [Special Rec]
5 Select [Off] and then press SET.
Frame recording mode ends and all of the recorded frames are joined together into one clip.
The tally lamps go out and [STBY] appears at the top of the screen.
NOTES
You can use only one special recording mode at a time.
While recording, you cannot change the number of frames.
Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
Frame recording mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the [J Other Functions] [Bit Rate/Resolution] or [Frame Rate] setting.
The time code advances by the number of frames recorded. If the running mode of the time code (0 70) is
set to [Free Run] or the time code is input from an external source (b only), the running mode will switch
to [Rec Run] during special recording mode. When special recording mode is deactivated, the running mode
will return to its previous setting.
b During special recording mode, the time code signal will not be output from the GENLOCK/TC
terminal or HD/SD SDI terminal.
Slow & Fast Motion Mode
When you set [J Other Functions] [Frame Rate] to a progressive frame rate (0 46), the camcorder can
record with a frame rate (shooting frame rate) that is different from the playback frame rate. Recording a clip at a
higher frame rate than the [Frame Rate] setting will result in a slow motion effect during playback. Conversely, a
lower frame rate will result in a fast motion effect.
Sound is not recorded in this mode. This mode is not available if [J Other Functions] [Bit Rate/Resolution] is
set to [35 Mbps 1440x1080].
Configuring Slow & Fast Motion Mode
1 Open the [S&F Frame Rate] submenu.
[J Other Functions] [Slow & Fast Motion] [S&F Frame Rate]
2 Select the desired shooting frame rate and then press SET.
Available Shooting Frame Rates
* Available only when [J Other Functions] [Bit Rate/Resolution] is set to
[50 Mbps 1280x720] or [35 Mbps 1280x720].
Activating Slow & Fast Motion Mode and Recording
1 Open the [Special Rec] submenu.
[J Other Functions] [Special Rec]
12 15 18 20 21 22 24 25 26 27
28 30 32* 34* 36* 40* 44* 48* 54* 60*
[J Other Functions]
[Slow & Fast Motion]
[S&F Frame Rate]
[J Other Functions]
[
Special Rec]
[Off]
COPY