0
Owner's of the Behringer Stereo Amplifier Behringer Stereo Amplifier gave it a score of 0 out of 5. Here's how the scores stacked up:
ENGLISH
XENYX 502/802/1002/1202 User Manual
2
ENGLISH
XENYX 502/802/1002/1202 User Manual
3
*
Terminals marked with this symbol carry electrical current of
suffi cient magnitude to constitute risk of electric shock. Use only
high-quality commercially-available speaker cables with ¼" TS
plugs pre-installed. All other installation or modifi cation should be
performed only by qualifi ed personnel.
*
This symbol, wherever it appears, alerts you to the presence of
uninsulated dangerous voltage inside the enclosure - voltage that
may be suffi cient to constitute a risk of shock.
!
This symbol, wherever it appears, alerts you to important operating
and maintenance instructions in the accompanying literature.
Please read the manual.
Caution !
To reduce the risk of electric shock, do not remove the top cover
(or the rear section). No user serviceable parts inside. Refer servicing
to qualifi ed personnel.
Caution !
To reduce the risk of fi re or electric shock, do not expose this
appliance to rain and moisture. The apparatus shall not be exposed
to dripping or splashing liquids and no objects fi lled with liquids,
such as vases, shall be placed on the apparatus.
Caution !
These service instructions are for use by qualifi ed service personnel
only. To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation instructions.
Repairs have to be performed by qualifi ed service personnel.
Read these instructions.
[1]�
Keep these instructions.[2]�
Heed all warnings.[3]�
Follow all instructions.[4]�
Do not use this apparatus near water.[5]�
Clean only with dry cloth.[6]�
Do not block any ventilation openings. Install in accordance [7]�
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
[8]�
registers, stoves, or other apparatus (including amplifi ers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-
[9]�
type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fi t
into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched
{10}�
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Use only attachments/accessories specifi ed by
{11}�
the manufacturer.
Use only with the cart, stand, tripod, bracket,
{12}�
or table specifi ed by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning
{13}�
storms or when unused for long periods of time.
Refer all servicing to qualifi ed service personnel. Servicing is
{14}�
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet
{15}�
with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the
{16}�
disconnect device, the disconnect device shall remain
readily operable.
EN
Introduction1.
XENYX Mic Preamps
The microphone channels feature high-end
XENYX Mic Preamps that compare well with costly
outboard preamps in terms of sound quality and
dynamics and boast the following features:
130 dB dynamic range for an incredible amount of •
headroom
A bandwidth ranging from below 10 Hz to over 200 kHz •
for crystal-clear reproduction of even the finest nuances
The extremely low-noise and distortion-free circuitry •
guarantees absolutely natural and transparent signal
reproduction
They are perfectly matched to every conceivable •
microphone with up to 60 dB gain and +48 volt phantom
power supply
They enable you to use the greatly extended dynamic •
range of your 24-bit/192-kHz HD recorder to the full,
thereby maintaining optimal audio quality
“British EQ”
The equalizers used for the XENYX Series are based on
the legendary circuitry of top-notch consoles made in
Britain, which are renowned throughout the world for their
incredibly warm and musical sound character. Even with
extreme gain settings these equalizers ensure outstanding
audio properties.
CAUTION! !
We should like to draw your attention to the fact that ◊
extreme volumes may damage your hearing and/
or your headphones or loudspeakers. Turn the MAIN
MIX control and PHONES control in the main section
fully counter-clockwise before you switch on the unit.
Always be careful to set appropriate volume levels.
Important notes concerning installation
The sound quality may diminish within the range of ◊
powerful broadcasting stations and high-frequency
sources. Increase the distance between the transmitter
and the device and use shielded cables for all
connections.
General mixing console functions1.1
A mixing console fulfils three main functions:
• Signal processing: Preamplification, level adjustment,
mixing of effects, frequency equalization.
• Signal distribution: Summing of signals to the
aux sends for effects processing and monitor mix,
distribution to one or several recording tracks, power
amp(s), control room and 2-track outputs.
Mix:• Setting the volume level, frequency distribution
and positioning of the individual signals in the stereo
field, level control of the total mix to match the recording
devices/crossover/power amplifier(s). All other mixer
functions can be included in this main function.
The interface of BEHRINGER mixing consoles is optimized for
these tasks enabling you to easily keep track of the signal path.
The user’s manual1.2
The user’s manual is designed to give you both an overview
of the controls, as well as detailed information on how to use
them. In order to help you understand the links between the
controls, we have arranged them in groups according to their
function. The illustrations at the beginning of each chapter
show the controls described in each respective chapter.
The block diagram supplied with the mixing console ◊
gives you an overview of the connections between the
inputs and outputs, as well as the associated switches
and controls.
For the moment, just try and trace the signal path from the
microphone input to the FX send connector. Don’t be put off
by the huge range of possibilities; it’s easier than you think! If
you look at the overview of the controls at the same time, you’ll
be able to quickly familiarize yourself with your mixing console
and you’ll soon be making the most of all its many possibilities.
If you need to know more about specific issues, please visit
our website at http://www.behringer.com, where you’ll
find explanations of (for example) effects and dynamics
applications.
Before you get started1.3
Shipment1.3.1
Your mixing console was carefully packed in the factory to
guarantee safe transport. Nevertheless, we recommend that you
carefully examine the packaging and its contents for any signs of
physical damage, which may have occurred during transit.
If the unit is damaged, please do NOT return it to us, ◊
but notify your dealer and the shipping company
immediately, otherwise claims for damage or
replacement may not be granted.
Initial operation1.3.2
Be sure that there is enough space around the unit for
cooling purposes and to avoid over-heating please do not
place your mixing console on high-temperature devices
such as radiators or power amps. The console is connected
to the mains via the supplied cable. The console meets
the required safety standards. Blown fuses must only be
replaced by fuses of the same type and rating.
Never connect the XENYX to the power supply unit ◊
when the latter is connected to the mains! First
connect the power supply unit to the console, then
connect the power supply unit to the mains.
Important Safety Instructions
Find Your Products By Category
Please Login
