3.0
Owner's of the Behringer Speaker EUROLIVE gave it a score of 3.0 out of 5. Here's how the scores stacked up:
Page 3 of 5
Continued on next page
B215D/B212D/
B210D/B208D
15"/12"/10"/8" 2-Way
Active PA Speaker
Impact resistant,
molded enclosure.
Trapezoid shape
allows use as a
powered monitor
wedge.
Ultra-wide
dispersion and
large format horn.
State-of-the-art
1.35" aluminum-
diaphragm
compression driver
for exceptional
high-frequency
reproduction.
Extremely powerful
15"/12"/10"/8"
long-excursion
LF transducer
provides incredibly
deep bass and
acoustic power.
Ergonomically
shaped carry
handles on each
side of enclosure
for easy transport
of system. Two
handles on B212D/
B215D, one on
B210D.
1-/" (35-mm) pole
socket for standard
speaker stands.
Rubber feet for
stacking enclosure
on structures or
subwoofers.
B215D B212D B210D B208D
When combined with switching-mode
power supplies that replace heavy toroid
transformers, our new designs provide more
dynamic punch since the higher switching
frequency reloads the supply’s capacitors
much faster. And, because they are so much
more effi cient, the D Series runs cooler and
doesn’t require huge, heavy heat sinks. The
resulting speakers systems are much lighter,
making them easy to transport and set up. Our
no-compromise design means your D Series
active loudspeakers will deliver full power and
incredible fi delity all night long, with no need
for rest cycles.
Instant PA system
With just a single D Series loudspeaker
system and a microphone or MP3 player, you
can set up an instant sound system. Thanks to
the built-in preamp section, you just connect
a dynamic mic and raise and lower the volume
with the Level control. Plug in your sound
source, place the speaker on a tabletop or
stand, and power up. It’s just that easy. And
if you need more coverage, simply use the
convenient LINK OUTPUT XLR connector to
add more active loudspeakers.
Stereo music system
You can even use two D Series
enclosures for stereo playback of
your MP3, CD or old-skool cassette
deck without any additional
hardware. Just plug the appropriate
stereo “breakout” adapter into
your deck’s output jack and run
the cables to the ¼" inputs on
each loudspeaker. Set the Level
and EQ controls the same on both
enclosures. Voilà, instant party!
Marvelous monitoring
Thanks to their trapezoidal design,
these cabinets can be laid on their
side providing the ideal angle for
onstage monitor wedge applications.
Hookup is simple, requiring only
a single XLR or ¼" cable from the
monitor send on your mixing console
and, of course, power. Additional
monitors can be chained together via
the XLR LINK OUTPUT jack on the rear
panel.
Custom-designed transducers
Let’s face it; the transducers
(woofers and tweeters) are the only
part of a sound system you actually
hear, so we don’t cut any corners.
While some of our competitors
are content to buy off -the-shelf
transducers and plug them into their
boxes, we custom-design and build
our transducers from scratch. Not only
do we wind our own voice coils, we
process the paper pulp into cones and
even machine our own backplates.
This enables us to control the quality,
Find Your Products By Category
Please Login
