0

Out of 0 Ratings

Owner's of the Panasonic Car Video System LCD Video Monitor gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 80
 
50
3D Assist Mode (continued)
51
How to return to 2D mode
Select [2D] in [2D/3D ASSIST] in [MAIN MENU] (main menu) or use the <FUNCTION> button or use [2D/3D ASSIST] in the
[FUNCTION] menu to select it.
MIRROR (Left/Right and Top/Bottom inversion)
This function performs left/right, top/bottom and left/right/top/bottom inversion of SDI1 (L) and SDI2 (R) images to enable basic adjust-
ments of a rig-type 3D camera system (half mirror type).
MENUEXIT
RETURN
RETURN
[3D ASSIST]
MIRROR
SDI(L)
OFF
SDI(R)
TB
Screen:
The L/R 2 screens are shown side-by-side.
<Note>
• Left and right inversion and top and bottom inversion are also
reflected in other assist functions.
• The inversion setting information is even saved when the
power is turned off.
Underlined values indicate factory defaults.
Menu Setting Description
SDI1 (L)
OFF
LR
TB
LRTB
Inverts the left and right and top and bottom of images on the SDI1 (L) side.
[OFF] No inversion [LR] Left/right inversion
[TB] Top/bottom inversion [LRTB] Left/right/top/bottom inversion
SDI2 (R)
OFF
LR
TB
LRTB
Inverts the left and right and top and bottom of the images on the SDI2 (R) side.
[OFF] No inversion [LR] Left/right inversion
[TB] Top/bottom inversion [LRTB] Left/right/top/bottom inversion
SHIFT (Horizontal and Vertical Shift)
This function shifts the SDI2 (R) images horizontally or vertically to allow you to check the offset between the SDI2 (R) and SDI1 (L)
images.
You can check the lens axis of a rig-type 3D camera system while checking the rotation offset of the image.
MENUEXIT
RETURN
RETURN
[3D ASSIST]
SHIFT
H 0
V 0
Screen:
Overlay L/R on one screen.
<Note>
The setting information for shifting images with the SHIFT
function is not stored. The initial display state is restored when
you switch to the COMPARISON function or another assist
function.
Underlined values indicate factory defaults.
Menu Setting Description
H
-128 to 127
(Factory default setting: 0)
Shifts the images on the SDI2 (R) side horizontally.
V
-32 to 31
(Factory default setting: 0)
Shifts the images on the SDI2 (R) side vertically.