0

Out of 0 Ratings

Owner's of the Kramer Electronics Ventilation Hood Kramer Electronics Ventilation Hood gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 14
 
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Install the Kramer RK-1UTB/T Under the Table Enclosure
8
5.2 Securing the RK-1UTB/T Enclosure to the Table
To install the RK-1UTB/T underneath the table, as illustrated in
Figure 7, do
the following:
1. Place the unit to the underside of the table and mark the correct location.
2. Insert the six 4x3/8” wood screws into the six rim screw holes (three on
each side) and fix the RK-1UTB/T to the table.
Figure 7: Securing the RK-1UTB/T Underneath of the Table
5.3 9BInstalling the Cables
To install the cables, do the following:
1. Connect the cables on the rear side of the unit.
2. Connect the Kramer machine (for example, the TP-953) to the power
socket.
The RK-1UTB/T can accommodate 12V, 500mA and 5.2V, 2A DC power
adapters. If the machine installed requires a larger size power adapter, we
recommend using the Kramer 12V desktop power supply with a DC plug17F
1
which fits easily into the rear side of the RK-1UTB/T enclosure.
3. Connect other devices to the power sockets on the front panel.
4. Connect the rear side power socket to the mains power.
The RK-1UTB/T is ready for use.
1 P/N 2535-000635