0

Out of 0 Ratings

Owner's of the JVC Blu-ray Player JVC Blu-ray Player gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 112
 
m
DIGITAL OUT
Set this item according to the device connected to the digital
audio output terminal (optical digital).
v
PCM DOWN SAMPLING
For specifying settings on sampling frequency conversion.
Setting
Values
Description
OFF Sampling frequency is not converted.
ON Audio recorded at a sampling frequency of
96 kHz or 88.2 kHz is converted to 48 kHz
and 44.1 kHz respectively.
Memo:
v
Setting to “OFF” may produce the same effects as the “ON”
mode for some discs.
v
Dolby Digital
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values
Description
BITSTREAM Use this setting when connecting a
device that is able to decode “Dolby
Digital”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “Dolby
Digital”.
v
Dolby Digital Plus/TrueHD
For setting audio output to “BITSTREAM” or “PCM”.
Setting
Values
Description
BITSTREAM Use this setting when connecting a
device that is able to decode “Dolby
Digital Plus/TrueHD”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “Dolby
Digital Plus/TrueHD”.
v
DTS
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values
Description
BITSTREAM Use this setting when connecting a
device that is able to decode “DTS”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “DTS”.
v
DTS-HD
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values Description
BITSTREAM Use this setting when connecting a
device that is able to decode “DTS-HD”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a device
that is unable to decode “DTS-HD”.
v
AAC
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values
Description
BITSTREAM Use this setting when connecting a
device that is able to decode “AAC”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “AAC”.
Memo:
v
Audio sound may not be properly played back if the audio
equipment in use does not support “BITSTREAM” output.
In this case, set to “PCM”.
m
DV IN AUDIO SETTING
For changing the audio recording settings during DV input.
Setting Values
Description
STEREO 1 Records the audio sound during video
recording (L1, R1).
STEREO 2 Records audio sound that is added later
(L2, R2), such as during editing.
MIX Records “STEREO 1” and “STEREO 2”
sounds.
m
BD MIX SOUND
For setting a mixture of BD video secondary audio and
operation sounds output.
Setting
Values
Description
OFF Outputs main audio only.
ON Outputs a mixture of BD video secondary
audio and operation sounds during playback
of BD-Videos that contain BD video
secondary audio and menu operation
sounds.
Memo:
v
Output is converted to Dolby Digital or DTS according to
the main audio when the “DIGITAL OUT” item is set to
“BITSTREAM”.
Settings Menu
82
2012/3/8 13:53:0