IOGear Portable Speaker 2/4-Port Dual View Dual Link DVI KVMP Switch with Audio User Manual

0

Out of 0 Ratings

Owner's of the IOGear Portable Speaker 2/4-Port Dual View Dual Link DVI KVMP Switch with Audio gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 38
 
Note: In order to perform a rmware upgrade, you need to use a computer that’s not connected to the
KVM.
Step 1
Make sure that the power adapter is connected to the KVM. Shut down all other computers connected to
the GCS1642A / GCS1644A installation, except the computer connected to port 1.
Step 2
If you have a Quad View installation, remove the cable connected to the DCC port, which connects the
two GCS1642A / GCS1644A units, and set both DCC switches to Host.
Step 3
Invoke Firmware Upgrade Mode (see Firmware Upgrade Mode, page 23). The front panel LEDs ash
together to indicate Firmware Upgrade Mode is in effect.
Step 4
Remove keyboard and mouse from the KVM, then plug these into the computer connected to port 1.
Step 5
Choose the Firmware Upgrade Package you want to install you downloaded from the IOGEAR website for
the GCS1642A / GCS1644A.
27
Firmware Upgrade

   Find Your Products By Category