0
Owner's of the Datavideo DVD Recorder Datavideo HD HDD Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
12
SET I-FRAME ONLY
Set the HDR unit to encode Intra frame only instead of I, P and B
frames or Groups Of Pictures.
SET 1080i H-RES.
To select the encoding horizontal resolution while input source is 1920x1080i
- Select 1920, the record format is 1920x1080i.
- Select 1440, the record format is 1440x1080i.
See SET 1080i H-RES. Menu (Page 16) for more details.
SET GPI TRIGGER MODE
The HDR unit has two GPI trigger modes, Pulse or Level trigger can
be set.
See GPI Mode & Function Menus (Page 17) for more details.
SELECT GPI FUNCTION
The GPI function can be set to either Play / Play Pause or Record /
Record Pause. See GPI Mode & Function Menus (Page 17).
SET DATE & TIME
Sets the date and time on the HDR unit; the setting is non-volatile so it
is stored even when the unit is powered off.
See Set Date & Time Menu (Page 18) for more details.
FORMAT HARD DISK
Formats the HDD and erases all files and tracks from the HDR unit.
See Format Hard Disk Menu (Page 18) for more details.
ERASE TRAC
K
Erases the selected track from the HDR unit.
See Erase Track Menu (Page 19) for more details.
HDD SURFACE SCAN
Checks the HDD for errors / bad sectors. This is only necessary if your
HDR unit is not performing correctly, or if you install a new HDD. This
will take a long time to process. The unit will create a result.txt file in
the root directory of the HDD and this can be viewed from a PC.
D-SUB H/W INTERFACE
The 9 pin D-SUB can be set to either RS-422 (differential) or RS-232
(single end) transmission mode
- Select RS-232 mode, you can control HDR unit RS-232 from PC.
- Select RS-422 mode, you can control HDR unit via RS-422 from
external devices.
FP FIRMWARE UPDATE
To upgrade the front panel firmware.
FIRMWARE VERSION
Display the Revision Number and Firmware Version of the HDR unit
Find Your Products By Category
Please Login
