0

Out of 0 Ratings

Owner's of the Canon Camera Accessories 2805B002 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 38
 
28
Set the slave ID if you use two (A and B) or three (A, B, and C) slave
groups.
1
Press the <G> button
so that <x> blinks.
2
Press the <9> button to select
the slave ID (A, B, or C).
3
Press the <8> button to set the
slave ID.
If the camera has a depth-of-field preview button, press it to fire a 1-sec.
burst of flashes. This is the modeling flash.
You can check the lighting and shadow effects. You can fire the
modeling flash for both wireless and normal flash shooting.
For example, if you have the slave ID set
to <1> for three Speedlites, all three
Speedlites will be controlled as if they
were one Speedlite in slave group A.
Setting the Slave ID
Modeling Flash
About Slave Group Control
Do not fire the modeling flash more than 10 consecutive times. If you fire the
modeling flash 10 consecutive times, allow the Speedlite to rest for at least
10 min. to avoid overheating and deteriorating the flash head.
The modeling flash cannot be fired with the EOS 300/REBEL 2000 and
Type-B cameras (p.2).
ID = A ID = AID = A
Slave group A
A52_E.book Page 28 Friday, June 10, 2005 4:40 PM