0

Out of 0 Ratings

Owner's of the Sharp Car Video System LCD Monitor gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 54
 
45
E
Troubleshooting
If you are experiencing any problem with your display, before
calling for service, please review the following troubleshooting
tips.
There is no picture or sound.
Is the power cord disconnected? (See page 13.)
• Is the main power switch off? (See page 16.)
• Is the monitor in standby mode (the power LED illuminating
in orange)? (See page 16.)
• Make sure correct input mode is selected. (See page 18.)
• If any external equipment is connected, make sure the
equipment is operating (playing back).
Remote control does not work.
Are the batteries inserted with polarity (+,-) aligned? (See
page 15.)
• Are the batteries exhausted?
• Point the remote control unit toward the monitor’s remote
control sensor. (See page 15.)
• Is the menu display hidden or is operation disabled? (See
page 29.)
Sound from left and right speakers is reversed.
Sound is heard from only one side.
Are audio cables connected properly?
Check the setting of BALANCE for AUDIO menu. (See
page 23.)
There is a picture but no sound.
Is the sound muted?
Make sure the volume is not set to minimum.
Are audio cables connected properly?
Is the setting of AUDIO SELECT on the SETUP menu
correct? (See page 23.)
Unstable video.
The signal may be incompatible.
Try the automatic screen adjustment when the D-SUB is
used.
The video from the HDMI input terminal does not appear
properly.
Is the HDMI cable HDMI standard compliant? The monitor
will not work with cables that are not standard compliant.
Is the input signal compatible with this monitor? (See page
51.)
The video from the DVI-D input terminal does not appear
properly.
Is the input signal compatible with this monitor? (See page
51.)
Turn off the power to the connected equipment and then
turn the power on again.
If the monitors are connected in a daisy chain, turn off the
power to all the monitors connected in a daisy chain and
then turn the power on again.
The video from D-Sub input terminal does not appear
properly.
Is the input signal compatible with this monitor? (See page
51.)
The video from the DisplayPort does not appear properly.
Is the input signal compatible with this monitor? (See page
51.)
The video from component input terminals does not
appear properly.
Is the video cable (Y/Cb/Cr) connected correctly?
Is the input mode set to COMPONENT?
The video will not appear correctly if the input mode is set
to VIDEO.
The video from video input terminal does not appear
properly.
Is the input mode set to VIDEO?
The video will not appear correctly if the input mode is set
to COMPONENT.
Control buttons do not work.
There is no picture.
Load noises from outside may be interfering with normal
operation. Turn off the power and turn it on after waiting at
least 5 seconds, and then check the operation.
The monitor makes a cracking sound.
• You may occasionally hear a cracking sound from the
monitor. This happens when the cabinet slightly expands
and contracts according to change in temperature. This
does not affect the monitor’s performance.