0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 209
 
– 59 –
Chapter 4 Adjustments and Settings for Recording — Selecting audio input and adjusting recording levels
When the level adjustment dial is assigned to [CH1/2]
r Selection of level adjustment of channels 1/2
For the level adjustment method of channels 1/2, select <AUTO> (automatic adjustment) or <MANU> (manual adjustment by adjustment dial) by the
<AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch.
When <MANU> is selected, the volume of channels 1/2 is adjusted by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial.
r Adjustment by <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial
Adjustment the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial while viewing the audio channel level meter in the display window or the audio
level meter in the LCD monitor. When the topmost bar (0 dB) is exceeded, the [OVER] display is illuminated to indicate that input audio is excessive.
The maximum level must be adjusted so that the display does not reach 0 dB.
r Adjustment by <F.AUDIO LEVEL> dial
When operating the camera alone, we recommend using the <F.AUDIO LEVEL> dial to adjust the audio level. Select the audio channel to be adjusted
in advance, and while viewing the level meter of the viewnder screen, adjust the level by the <F.AUDIO LEVEL> dial so that input does not become too
great.
When adjusting the recording level by the <F.AUDIO LEVEL> dial, perform the following operation. Select whether to enable [FRONT VR CH1] and
[FRONT VR CH2] on the line selected as the input signal of each channel in the main menu [I/F SETUP] [MIC/AUDIO].
[OFF]: Disabled
[FRONT]: Enabled when <FRONT> is selected for the input signal
[W.L.]: Enabled when wireless is selected for the input signal
[REAR]: Enabled when <REAR> is selected for the input signal
[ALL]: Enabled on all input lines
r Level adjustment of channels 3/4
Automatic adjustment is enabled when [AUTO LVL CH3] and [AUTO LVL CH4] are set to [ON] in the main menu [I/F SETUP] [MIC/AUDIO]. When
these items are set to [OFF], automatic adjustment stops functioning, and the audio level can be adjusted by [LVL CONTROL CH3] and [LVL CONTROL
CH4] in [MIC/AUDIO].
When the level adjustment dial is assigned to [CH3/4]
r Selection of level adjustment of channels 3/4
For the level adjustment method of channels 3/4, select <AUTO> (automatic adjustment) or <MANU> (manual adjustment by adjustment dial) by the
<AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch.
When <MANU> is selected, the volume of channels 3/4 is adjusted by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial.
r Adjustment by <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial
Adjustment is possible by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial in the same way as when the level adjustment dial is assigned to
[CH1/2].
r Level adjustment of channels 3/4
Automatic adjustment is enabled when [AUTO LVL CH1] and [AUTO LVL CH2] are set to [ON] in the main menu [I/F SETUP] [MIC/AUDIO]. When
these items are set to [OFF], automatic adjustment stops functioning, and the audio level can be adjusted by [LVL CONTROL CH1] and [LVL CONTROL
CH2] in [MIC/AUDIO].
Selection of adjustment method
r When [CH1/2] is selected by [VR SELECT]
Channel 1, channel 2 Channel 3, channel 4
<AUDIO SELECT CH1/3> switch
<AUDIO SELECT CH2/4> switch
Adjustment method
[AUTO LVL CH3]
[AUTO LVL CH4]
Adjustment method
<MANU>
Manual adjustment by adjustment
dial
[OFF]
Manual adjustment by [LVL CONTROL
CH3], [LVL CONTROL CH4]
<AUTO> Automatic adjustment [ON] Automatic adjustment