Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 44 –
Chapter 3 Recording and Playback — Proxy recording
Error displays
(viewnder screen)
Behavior and cause Action to take
[SD END] Proxy data recording to the SD memory card will stop, but
recording to the P2 card will continue.
f No SD memory card capacity remains.
After nishing recording, insert a new SD memory card.
f The proxy data being recorded to the SD memory card will
be deleted.
To restore the deleted proxy data, select clips in the P2 card
and copy them to the SD memory card. (page 44)
[SD WR ERR] Proxy data recording to the SD memory card will stop, but
recording to the P2 card will continue.
Even if the main menu → [REC/PB] → [PROXY SETUP] →
[REC MEDIA] is set to [P2&SD], this is displayed when proxy
data cannot be recorded to the SD memory card.
r If the error message is displayed when recording
starts:
f The SD memory card format is different.
f The SD memory card contains 1000 clips or more.
f An attempt is made to record to an SD memory card
containing data for updating the rmware of the camera.
r If the error message is displayed during
recording:
f The SD memory card was ejected during recording.
f An error occurred in recording to the SD memory card.
Check the status of the SD memory card and insert a
recordable card. (page 42)
[SD --min] or [SD WP] Proxy data will not be recorded to the SD memory card, but
recording to the P2 card will be performed.
f No SD memory card is inserted. [SD --min]
f The SD memory card is write-protected. [SD WP]
Check the status of the SD memory card.
Copying proxy data to the SD memory card
1
Press the <THUMBNAIL MENU> button to display the thumbnail screen.
2
Use the cursor buttons to move the cursor to the clip to be copied, and press the <SET> button.
3
Press the <MENU> button.
4
Select [SD CARD] in the main menu → [CLIP] → [COPY].
5
Select [YES] in the confirmation message and press the <SET> button.
@@
NOTE
t If [SD END] is displayed and the proxy data being recorded to the SD memory card is deleted, perform this procedure to copy the proxy data from the
P2 card, and enable the deleted proxy data to be restored.
t Source data is not copied.

   Find Your Products By Category