Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 198 –
Chapter 9 Maintenance and Inspection — Warning system
Message Description Measure
[USER CLIP NAME MODIFIED!]
When adding a counter value to the clip name, characters
must be deleted.
For the counter addition setting, the user clip name plus the
counter value can only contain up to 100 bytes. Characters in
the clip name are automatically deleted when the total number
of characters exceeds this limit.
[WRITE PROTECTED!] The P2 card or SD memory card is write-protected. Insert write-accessible media.
r Soft keyboard
Message Description Measure
[AUTHENTICATION ERROR!] Manual authentication failed. Enter the correct password.
[CANNOT CHANGE!]
An attempt is made to enter the [PERSON] item (user who
enters the memo) when there is no text memo.
Enter the [TEXT] (text information) rst.
[CANNOT SET!]
[INVALID VALUE!]
The entered value is invalid. Change the input value.
[CANNOT SET!]
[NO INPUT!]
There is not input to the software keyboard. Enter the password.
[CANNOT SET!]
[RETRY PASSWORD IS
DIFFERENT!]
The re-entered password is different. Enter the correct reference password.
r Storage
Message Description Measure
[CANNOT ACCESS CARD!] An error occurred while accessing the P2 card. Check the P2 card.
[CANNOT ACCESS TARGET!] An error occurred while accessing the connection target. Check the storage device status and connection.
[CANNOT COPY! FORMAT
STORAGE DEVICE TO FAT]
The partition that can copy clips does not exist on the storage
device.
Reformat in FAT format, or export the P2 card to create a
partition.
[CANNOT FORMAT!] The storage device cannot be formatted. Change the connected storage device.
[CANNOT RECOGNIZE
STORAGE DEVICE!]
The storage device is not correctly recognized. Reboot the storage device or connect another storage device.
[CANNOT SELECT! MAX.6
PARTITIONS]
Storage devices with more than 6 partitions cannot be
selected (mounted simultaneously).
Release selected partitions.
[CARD IS EMPTY! CANNOT
COPY!]
The P2 card to copy is empty.
The copy operation is not performed because the card is
empty.
[FORMAT P2 CARD!] Cannot import to a P2 card containing clips. Format the P2 card.
[LACK OF CAPACITY!] Not enough space left on the storage device.
Use a new storage device with sufcient available space or a
formatted storage device.
[MISMATCH COMPONENT!]
The P2 card model number of the copy source and copy
destination do not match. Cannot copy.
Use the P2 cards of the same model number, or import on a
clip basis.
[STORAGE DEVICE
DISCONNECTED!]
The connection with the storage device is disconnected.
Reconnect the USB cable to the <USB3.0> terminal (host).
When it does not function normally after that, turn off the
power once and turn on the power again.
[TOO MANY PARTITIONS!] There are too many partitions.
The maximum number of partitions on the storage device is
23. Either reformat, or use a new storage device.
[UNKNOWN DEVICE
CONNECTED!]
A non-compatible DVD drive or other device is connected.
Change the connected device to the correct storage device,
and then turn the power off once and turn it on again.
[VERIFICATION FAILED!] The compare check performed after copying failed. Copy it again.

   Find Your Products By Category