0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 209
 
– 160 –
Chapter 7 Menu Operations — Menu list
[GENLOCK]
Item Description of settings Remark
[GENLOCK] Switches the synchronization signal of the camera signal.
f When the main menu [SYSTEM] [SYSTEM
MODE] [REC SIGNAL] is set to [SDI], the
camera synchronizes to the reference signal input
to the <SDI IN> terminal regardless of this setting.
[INT] Synchronizes to the internal standard signal independent of
standard signals input to the <GENLOCK IN> terminal or <SDI
IN> terminal.
[GL IN] Synchronizes to the standard signal input to the <GENLOCK
IN> terminal.
[SDI IN] Synchronizes to the standard signal input to the <SDI IN>
terminal.
[GL PHASE] Selects the output signal of phase to be locked to the signal input to the
<GENLOCK IN> terminal. (at 1080/59.94i, 1080/50i only)
[HD SDI] Locks the HD SDI output signal to generator lock input. The
video start position of the down converter output signal lags by
approx. 90 lines.
[COMPOSITE] Locks the down converter output signal to generator lock input.
The video start position of the HD SDI output signal advances
by approx. 90 lines.
[H PHASE COARSE]
Roughly adjusts to match horizontal synchronization phase when building a
system.
[100]…[0]…[100]
[H PHASE FINE]
Minutely adjusts to match horizontal synchronization phase when building a
system.
[100]…[0]…[100]
are factory settings.
[MIC/AUDIO]
Item Description of settings Remark
[VR SELECT] Selects which channel to assign to the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL
CH2/4> and <F.AUDIO LEVEL> dials.
f When [CH3/4] is selected in [VR SELECT],
channels are also replaced for the following six
items.
- [FRONT VR CH1] [FRONT VR CH3]
- [FRONT VR CH2] [FRONT VR CH4]
- [AUTO LVL CH3][AUTO LVL CH1]
- [AUTO LVL CH4][AUTO LVL CH2]
- [LVL CONTROL CH3] [LVL CONTROL CH1]
- [LVL CONTROL CH4] [LVL CONTROL CH2]
For details, refer to “Adjusting the recording
levels” (page 58).
[CH1/2] Assigns level adjustment of channels 1/2. Channels 3/4 can be
automatically adjusted or adjusted by [LVL CONTROL CH3] or
[LVL CONTROL CH4].
[CH3/4] Assigns level adjustment of channels 3/4. Channels 1/2 can be
automatically adjusted or adjusted by [LVL CONTROL CH1] or
[LVL CONTROL CH2].
[FRONT VR
CH1(CH3)]
Sets whether to enable the <F.AUDIO LEVEL> dial for input signals selected in
audio CH1 (CH3).
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
[FRONT] Enabled only when [FRONT] is selected.
[W.L.] Enabled only when wireless microphone receiver is selected.
[REAR] Enabled only when [REAR] is selected.
[ALL] Enabled when any input is selected.
[OFF] Disabled regardless of the input selected. Recording levels do
not change even if the volume dial is turned.
[FRONT VR
CH2(CH4)]
Sets whether to enable the <F.AUDIO LEVEL> dial for input signals selected in
audio CH2 (CH4).
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
[FRONT] Enabled only when [FRONT] is selected.
[W.L.] Enabled only when wireless microphone receiver is selected.
[REAR] Enabled only when [REAR] is selected.
[ALL] Enabled when any input is selected.
[OFF] Disabled regardless of the input selected. Recording levels do
not change even if the volume dial is turned.
[AUTO LVL
CH3(CH1)]
Selects whether to automatically adjust the level adjustment method for audio
CH3 (CH1).
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
[ON] Automatic adjustment is enabled.
[OFF] Automatic adjustment is disabled. Can be adjusted using [LVL
CONTROL CH3(CH1)] at this time.
[AUTO LVL
CH4(CH2)]
Selects whether to automatically adjust the level adjustment method for audio
CH4 (CH2).
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
[ON] Automatic adjustment is enabled.
[OFF] Automatic adjustment is disabled. Can be adjusted using [LVL
CONTROL CH4(CH2)] at this time.
[LVL CONTROL
CH3(CH1)]
Can be manually adjusted with this item when automatic level adjustment of audio
CH3 (CH1) is [OFF].
[0]…[70]…[100]
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
are factory settings.