0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 159 –
Chapter 7 Menu Operations — Menu list
[MONI OUT MARKER]
Item Description of settings Remark
[CENTER MARK] Switches the center marker.
[1]
+ (large)
[2] Open center (large)
[3]
+ (small)
[4] Open center (small)
[OFF] Does not display.
[SAFETY MARK] Selects the type of frame for the safety zone marker.
f If the main menu → [I/F SETUP] → [DOWNCON
SETTING] → [DOWNCON MODE] is set to [SIDE
CROP] or [LETTER BOX], the safety zone marker
is not displayed to the down converter output
signal in HD mode.
[1] Box
[2] Corners
[OFF] Does not display.
[SAFETY AREA]
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]…[90%]…[100%]
[FRAME MARK]
Enables/disables frame marker.
[ON], [OFF]
[FRAME SIG]
Sets frame marker aspect ratio.
[4:3], [13:9], [14:9], [VISTA], [CNSCO]
f [VISTA] is 16:8,65, and [CNSCO] is 16:6,81.
[USER BOX]
Sets whether to display the user box to the signal from the monitor output terminal
(<SDI OUT2>, <HDMI OUT>, or <VIDEO OUT>).
[ON], [OFF]
f If the main menu → [I/F SETUP] → [DOWNCON
SETTING] → [DOWNCON MODE] is set to [SIDE
CROP] or [LETTER BOX], the user box is not
displayed to the down converter output signal in
HD mode.
[USER BOX WIDTH]
Sets the width of the user box.
[1]…[13]…[100]
[USER BOX HEIGHT]
Sets the height of the user box.
[1]…[13]…[100]
[USER BOX H POS]
Sets the horizontal position of the center of the user box.
[−50]…[0]…[50]
[USER BOX V POS]
Sets the vertical position of the center of the user box.
[−50]…[0]…[50]
are factory settings.
[DOWNCON SETTING]
Item Description of settings Remark
[DOWNCON MODE]
Sets the mode of the down converter output signal.
[SIDE CROP], [LETTER BOX], [SQUEEZE]
f When [LETTER BOX] is selected, some parts of
the top and bottom edges of the down converter
output video may be distorted. This is not a
malfunction.
[DETAIL]
Turns detail function for the down converter output signal [ON]/[OFF].
[ON], [OFF]
The down converter output signal contains detail components set during HD signal
processing.
This setting superimposes the detail components exclusive to down converter
output to that signal.
f Even if this setting is [OFF], the detail components
set during HD signal processing cannot be
disabled.
[H.DTL LEVEL]
Sets horizontal detail correction level for the down converter output signal.
[0]…[8]…[31]
[V.DTL LEVEL]
Sets vertical detail correction level for the down converter output signal.
[0]…[4]…[31]
[DTL CORING]
Sets the detail noise removal level.
[0], [1]…[15]
[H.DTL FREQ.]
Selects the horizontal detail frequency.
[2.5MHz], [3MHz], [3.5MHz], [4MHz], [4.5MHz]
[2D LPF] Sets the lter.
[ON] Reduces cross colors.
[OFF] Does not reduce cross colors.
are factory settings.
Find Your Products By Category
Please Login
