0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 209
 
– 157 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[TC OUTPUT REF] Sets the output delay of time code output from the <TC OUT> terminal.
For details, refer to “Externally locking the time code” (page 65).
[TC IN] Match to external time code input.
[VIDEO OUT] Match to output images.
[REC CHECK
REGEN]
Selects whether to regenerate to the time code last recorded to the P2 card at the
next recording when the <RET> button that assigns recording check function or
the <USER> button is pressed.
[ON] Regenerates.
[OFF] Does not regenerate.
are factory settings.
[REC METADATA]
Item Description of settings Remark
[LOAD] Loads the metadata upload le saved to the SD memory card.
[RECORD] Sets whether to add loaded metadata at a recording.
[ON] Adds.
[OFF] Does not add.
[USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME].
When [RECORD] is [ON]:
[TYPE1] Records setting values of the loaded data.
[TYPE2] Records loaded data and counter values.
When [RECORD] is [OFF]:
[TYPE1] Records the same value as [GLOBAL CLIP ID].
[TYPE2] Records the same value as [CLIP NAME].
[INITIALIZE] Deletes all loaded metadata and initializes.
[PROPERTY] Checks and corrects loaded metadata. f This item is enabled while the thumbnail is
displayed.
[LANGUAGE]
Sets the language used to display metadata.
[ENGLISH], [JAPANESE]
f This items is displayed when [NTSC (J)] is
selected in [OPTION MENU] [AREA SETTING].
are factory settings.
[I/F SETUP]
[OUTPUT SEL]
Item Description of settings Remark
[OUTPUT ITEM] Sets the character content to superimpose on the output signal of the <SDI
OUT1> terminal and monitor output terminal (<SDI OUT2>, <HDMI OUT>, and
<VIDEO OUT>).
f The time code display position moves up and
down based on the camera ID position.
[MENU ONLY] Displays only on the menu. Normally, nothing is displayed.
[TC] Displays the time code. (Menu is displayed on the menu)
[STATUS] Displays all items that are the same as the character displayed
on the viewnder. (Menu is displayed on the menu)
[SDI OUT1] Turns <SDI OUT1> terminal output [ON]/[OFF].
[ON] Performs output.
[OFF] Stops output.
[SDI OUT1 MODE] Selects <SDI OUT1> terminal output signals.
[MEM] In playback mode, these are playback images.
[CAM]
When the main menu [SYSTEM] [SYSTEM MODE]
[REC SIGNAL] is set to [CAM], output is always camera
images.
[SDI OUT1 CHAR] Selects whether to superimpose characters on <SDI OUT1> terminal output
images.
f The content of characters to superimpose is the
same as the characters superimposed on images
output from <SDI OUT2> and other terminals.
[ON] Superimposes.
[OFF] Does not superimpose.
[SDI OUT2] Turns <SDI OUT2> terminal output [ON]/[OFF].
[ON] Performs output.
[OFF] Stops output.
[VIDEO OUT] Turns <VIDEO OUT> terminal output [ON]/[OFF].
[ON] Performs output.
[OFF] Stops output.
are factory settings.