Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 129 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
[FREE CAP.] Remaining storage device capacity
@@
NOTE
t You can change the thumbnail screen display if necessary.
t The 1001st clips onwards are not displayed.
Displaying clip information
You can display each type of metadata of clips saved in a storage device. The display mode is the same as the P2 card clip properties.
1
In the storage device thumbnail screen, move the cursor to the target clip.
2
Press the <MENU> button.
3
Select [CLIP PROPERTY] in the main menu → [CLIP] → [PROPERTY] and press the <SET> button.
This cannot be modied.
Deleting clips
You can delete unnecessary clips saved in a storage device.
1
In the storage device thumbnail screen, select the clip you want to delete.
2
Press the <MENU> button.
3
Select [DELETE] in the main menu → [CLIP] and press the <SET> button.
4
Move the cursor to [YES] in the confirmation message and press the <SET> button.
@@
NOTE
t You may not be able to delete clips with defective clip or unknown clip indicators.
Writing back to the P2 card from a storage device (import)
Importing from a [TYPE S] storage device or [P2STORE] by partition
You can import (write back to a P2 card from as storage device) to a P2 card with the same part number as the source card by partition (card).
1
Insert a P2 card that will serve as the input destination.
Make sure to insert a formatted P2 card.
2
Connecting a storage device.
3
Select [STORAGE] in the main menu → [CLIP] → [EXPLORE] to display the explorer screen.
4
In the explorer screen, display the partition thumbnails to be imported.
5
Select [IMPORT] in the main menu → [CLIP].
6
Place the cursor on the import destination P2 card slot number and press the <SET> button.
Start importing by selecting [YES] in the conrmation message.
[COPY COMPLETED!] will be displayed when importing is completed.
@@
NOTE
t Importing to a P2 card that is different from the source P2 card may result in incomplete clips depending on the clips. In this case, use the
reconnection function to recongure the clips.
t You can switch verication during copying on and off by setting the main menu → [CLIP] → [STORAGE COPY SETUP] → [VERIFY].
t You cannot import by partition to a P2 card of a different model. Perform copying by clip instead.
Copying to a P2 card by clip
You can specify a storage device clip and copy it to a P2 card.
1
Open the storage device thumbnail screen.
2
Select the clip you want to copy.
3
Press the <MENU> button.
4
In the main menu → [CLIP] → [COPY] → [STORAGE] list, move the cursor over the copy destination and press the <SET> button.
Start importing by selecting [YES] in the conrmation message.
[COPY COMPLETED!] will be displayed when copying is completed.

   Find Your Products By Category