0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 209
 
– 110 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
Selecting thumbnails
Multiple thumbnails can be randomly selected on the thumbnail screen.
a b c d e
a: <THUMBNAIL> button
b: <EXIT> button
c: awsq cursor buttons
r<SET> button
d: <MENU> button
e: <SHIFT> button
Selecting clips
You can select multiple clips randomly.
1
Use the cursor buttons to move the cursor over the desired clip.
2
Press the <SET> button.
A light blue frame and [ ] are displayed on the clip where the cursor is put. This indicates that it is selected.
3
To select additional clips, repeat steps 1 to 2.
It is possible to display only the selected clips on the thumbnail screen for playback.
@@
NOTE
t While holding down the <SHIFT> button, use the cursor buttons (`/{) to move the cursor to the rst or last clip.
t After selecting a clip, move the cursor to another clip and press the <SHIFT> button + <SET> button to select all clips from the previously selected clip
to the cursor position.
t As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1
Move the cursor to the selected clip and press the <SET> button.
This deselects the clip.
@@
NOTE
t While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.