0

Out of 0 Ratings

Owner's of the Panasonic Blu-ray Player Owners Manual Blu-ray DiscTM Player gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 40
 
- 24 -
Settings
[BD93]
¾24p Output
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p*
1
are output at 24p.
When playing DVD-Video, set to “On” and
then set “24p” in “Video Settings” (> 22) to
“On”.
When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color Output when a TV that supports Deep
Color is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
*1
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
*2
A high resolution image/display technology of
approximately 4000 (width)
k 2000 (height) pixels.
Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
“Auto” is effective only when playing Dolby
TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
[BDT270]
¾DSD Output Mode
Select the audio signal to output.
Select “PCM” or
[BDT270] “Off”, when the
connected equipment cannot decode the
respective audio format. This unit decodes
the audio format and transmits to the
connected equipment.
If you do not make proper settings the audio
may be static or noisy.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
Downmix
Select the downmix system of multi-channel to
2-channel sound.
Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
The audio will be output in “Stereo” in the
following cases:
AVCHD playback
Playback of secondary audio (including the
button click sound).
DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
This function works when the following
conditions are met:
Audio recorded at 96 kHz or lower is output.
“Digital Audio Output” is set to “
PCM
” when
audio other than PCM is output.
Audio