0
Owner's of the JVC Camcorder JVC Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:
.
AUTO WHITE A
OK
AUTO WHITE A
OPERATION
Result Display
[AWB] Activating
White Detection
Frame
Caution :
0
Do not use highly reflective objects, such as
metals. Doing so may result in improper white
balance adjustment.
0
The Auto White function cannot provide
optimum white balance with an object outside
the adjustment range, for example when it
contains only a single color or not enough white
color.
Error Message
If the white balance adjustment is not correctly
completed, one of the following messages will
appear for about 3 seconds.
Message Status
NG : OBJECT The object used is defective.
Displayed when there is not
enough white color on the
object, or when the color
temperature is not suitable.
Use another white object and
adjust the white balance
again.
ERROR : LOW
LIGHT
Insufficient illumination.
Displayed when the lighting is
dark. Increase the lighting
and adjust the white balance
again.
ERROR : OVER
LIGHT
Excessive illumination.
Displayed when the lighting is
too bright. Decrease the
lighting and adjust the white
balance again.
White Paint Adjustment
You can fine-tune the white balance saved in
Memory A or Memory B.
1
Select [AWB Paint] in the [Main Menu] B
[Camera Process] B [White Balance] menu,
and press the Set button (R).
The White Paint Adjustment screen appears.
.
1
2
Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.
3
Press the Set button (R).
Returns to the [White Balance] screen.
.
B Value
R Value
Memo :
0
Selecting [y] will usually clear the White Paint
Adjustment value. But when [Main Menu] B
[Camera Process] B [White Balance] B [Clear
Paint After AWB] is set to “Off”, values will not
be cleared even when [y] is selected.
(A P96 [ Clear Paint After AWB ] )
55
Shooting
Find Your Products By Category
Please Login
