0

Out of 0 Ratings

Owner's of the Canon Exercise Fitness Videos XF100 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 186
 
41
Recording Video
2 Press the START/STOP button to begin recording.
Recording starts. The front and rear tally lamps illuminate and the
recording indicator [NREC] appears on the screen.
You can use the START/STOP button on the side grip or handle.
When you use the wireless controller, press the START/STOP button
and the record enable button simultaneously.
3 Press the START/STOP button to pause the recording.
The clip* is recorded to the CF card and the camcorder enters record
pause mode. The tally lamps will also go out.
* “Clip” refers to one movie unit from the point you press the START/STOP button to start
recording until you press again to pause the recording. You can also include custom
picture settings (0 99) and metadata (0 82) with the clip.
IMPORTANT
Observe the following precautions while the CFj or CFl access
indicator is illuminated in red. Failure to do so may result in permanent
data loss.
- Do not open the CF card slot cover of the CF card slot being accessed and remove the CF card.
- Do not disconnect the power source or turn off the camcorder.
Be sure to save your recordings regularly (0 131), especially after making important recordings. Canon shall
not be liable for any loss or corruption of data.
NOTES
The START/STOP button on the handle has a lock lever to prevent accidental operation. Set the lock lever to
R in cases such as when you do not want a recording inadvertently paused or do not plan to use the START/
STOP button. Return the lever to its previous position to enable use of the START/STOP button again.
You can use the [J Other Functions] [Rec Review] setting (0 87) to review the last clip recorded.
If you set an assignable button to [Add e Mark] or [Add Z Mark] (0 97), you can press the button to add an
e mark or Z mark to the last clip recorded.
You can use the [J Other Functions] [Clips] [Delete Last Clip] setting (0 153) to delete the last clip
recorded. Alternatively, you can set an assignable button to [Delete Last Clip]. However, you cannot delete the
last clip if double slot recording is on.
b When you set the [J Other Functions] [SDI Rec Command] setting to [On] and you connect the
camcorder to another device using the HD/SD SDI terminal, if you start or stop recording with the camcorder,
the other device will also start or stop recording. For more details, visit your local Canon Web site.
The area around the tripod base may become hot after using the camcorder for an extended period of time.
This is not a malfunction.
COPY