0

Out of 0 Ratings

Owner's of the Canon Camcorder XA25 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 187
 
Recording Audio
87
NOTES
Even if you select [ INPUT 1], the audio recording level will be determined by the audio level
switch and dial for INPUT 2.
If you select [ Built-in Mic/MIC], the camcorder will record monaural sound. In such case,
[Audio Scene] will be set to [ Standard].
Audio Recording Level (INPUT Terminals)
You can set the audio recording level for audio input to automatic or manual independently for each
channel. Furthermore, when you adjust the audio recording level manually, you can set the level (from
G to 18 dB) independently for each channel, as well.
1 Set the audio level switch of the desired channel to A
(automatic) or M (manual).
If you set the switch to A, the audio level will be adjusted
automatically and you do not need to perform the rest of
the procedure. If you set the switch to M, continue the
procedure to set the audio recording level.
2 Turn the corresponding audio level dial.
For reference, MIN refers to –G, the larger mark in the
middle of the dial corresponds to 0 dB, and MAX
corresponds to +18 dB.
As a guideline, adjust the audio recording level so that the
audio level meter will go to the right of the 18 dB mark (one
mark right of the 20 dB mark) only occasionally.
NOTES
When the audio level meter reaches the red point (0 dB), the sound may be distorted.
If the audio level meter display is normal but the sound is distorted, activate the microphone's
attenuator (A 88).
We recommend using headphones to check the sound level while adjusting the audio recording
level or when the microphone attenuator is activated.
When using automatic adjustment, if both INPUT 1 and INPUT 2 are set to the same audio input
(external microphone or external line input), you can use the p > [INPUT 1/2 ALC Link] setting
to link the audio level adjustment of both channels.
If at least one of the channels is set to manual adjustment, you can activate the audio peak limiter
with the p > [INPUT 1/2 Limiter] setting. When activated, appears on the screen and the
audio peak limiter will limit the amplitude of audio input signals when they exceed -6 dBFS.
Adjusting the Microphone’s Sensitivity (INPUT terminals)
You can adjust the sensitivity of the input of the INPUT 1 and INPUT 2 terminals.
POINTS TO CHECK
Set the sensitivity switch of the desired INPUT terminal to MIC or MIC+48V.
COPY