0

Out of 0 Ratings

Owner's of the Canon Camcorder XA25 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 187
 
Connecting to an External Monitor
109
NOTES
• When q > [Output Terminal] is set to [ HD/SD-SDI & HDMI], the signal output
from the HDMI OUT terminal will be determined by the q > [HD/SD-SDI Output] setting.
The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output
terminal on an external device, as this may damage the camcorder.
There will be no video output from the AV OUT terminal while an external monitor is connected to
the HDMI OUT terminal.
Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.
Video may not be output correctly depending on the monitor. In such case, use another terminal.
If you selected an option other than [k Automatic] and the connected monitor is not compatible
with the signal output from the camcorder, then HDMI output will stop.
By default, onscreen displays will be embedded in the output video signal. You can change this
using the q > [Output Onscreen Displays] setting.
Using the AV OUT Terminal
The AV OUT terminal outputs a down-converted analog video signal and audio signal for connection
to monitors with a composite audio/video input.
NOTES
When you play back a scene on a monitor with a 4:3 aspect ratio, the monitor will switch
automatically to widescreen mode if it is compatible with the Video ID-1 system.
If you are connecting the camcorder to a standard definition monitor without widescreen mode,
make sure to change the s > [TV Type] setting.
COPY